Memories can be declared only for reg, integer and time data types. Depth of memory should be declared by specifying a range following the memory identifier (Example 1). Registers and memories can be declared in the same line (Example 2). Elements of memory type can be accessed by memory index (Example 3). An assignment to a memory identifier without specified memory index is illegal. Bit-selects and part-selects on memory elements are not allowed. If access to individual bits of memory is needed, then a word containing that bit should be assigned to a register with the same width. All operations should then be done on this register and the result should be assigned back to the memory word (Example 5). Memory words can be accessed individually, but bit-select and part-select operations cannot be done on memories or memory words directly.

Vector declaration and memory declaration are not the same. If a variable is declared as a vector, all bits can be assigned a value in one statement. If a variable is declared as memory then a value to each element should be assigned separately (Example 4).

Examples

Example 1

reg [7:0] mem[1023:0];
integer i_mem[8:1];

The 'mem' variable is a memory that contains 1024 8-bit words.

The 'i_mem' variable has 8 words (each word is an integer register).

Example 2

reg [3:0] mem[255:0], r;

This line a declares 4-bit register 'r' and memory 'mem', which contains 256 4-bit words.

Example 3

reg [7:0] mem [3:0], r;
mem[0] = 7;
r = mem[3];
mem[1] = r;

Example 4

reg [7:0] vect;
reg array[7:0];
vect = 8'b11001010;
array[7] = 1'b1;
array[6] = 1'b1;
array[5] = 1'b0;
array[4] = 1'b0;
array[3] = 1'b1;
array[2] = 1'b0;
array[1] = 1'b1;
array[0] = 1'b0;

If the variable is declared as a vector (variable vect), then the new value can be assigned to all bits at the same time. If a variable is declared as a memory (variable array) type, then the new value should be assigned to each element of memory separately.

Example 5

reg [7:0] mem[255:0], r;
r = mem[135];
r[3:1] = 3'b100;
mem[135] = r;

This example shows how to access particular bits of memory.

Important Notes

Memories can be declared only for reg, integer and time registers types.
Bit-selects and part-selects on memory elements are prohibited.